Project guide
Modular Loading Pin Set
Loading pins in two heights with captured base plates, protected edges, and collars matched to your plates.
A premium DIY build should be easier to inspect, repair, and live with than the bargain version it replaces. This guide keeps the load path visible and the dimensions tied to your actual space.
Build the version worth keeping
Cheap DIY becomes expensive when it wobbles, frays, traps fingers, or gets rebuilt twice. Prioritize serviceable parts, smooth contact surfaces, visible inspection points, and a conservative test plan.
This is a high-consequence project. The guide is a planning brief, not an engineering specification. Use rated components and qualified fabrication or installation anywhere failure could drop, strike, trap, or suspend a person.
Materials and tools
- steel pins
- base plates
- collars
- rubber base discs
- Measuring, marking, and edge-finishing supplies
- Labels for date, intended use, and inspection notes
Build sequence
- 01
Plan the fit
Draw the load path, moving envelope, hand positions, and failure zones before buying materials.
- 02
Prepare the parts
Have welded, pivoting, or highly loaded components fabricated or reviewed by a qualified professional.
- 03
Build the load path
Use replaceable wear surfaces and guards around pinch, shear, and impact points.
- 04
Finish the contact points
Assemble on a level surface and verify fastener torque, symmetry, and unobstructed travel.
- 05
Test and document
Proof-test with secured dead weight from a safe distance, then inspect after every early session.
Before the first workout
- Nothing rocks, twists, binds, or exposes a sharp edge.
- Wear parts can be inspected and replaced without rebuilding the frame.
- The load path uses rated hardware or professional fabrication where consequences are high.
- The finished footprint includes safe approach, movement, and fall or swing clearance.
- A first-use date and inspection interval are visible on the equipment.